-
### Description of the issue
Since upgrading to 1.39.0-1 I cannot access Zigbee2MQTT's frontend, getting "502: Bad Gateway" instead. Other addon frontends are accessible via ingress. There's nothin…
-
### Category
WiFi, Other
### Hardware
Heltec V3, Heltec Wireless Tracker, Other
### Firmware Version
2.3.12
### Description
This expands https://github.com/meshtastic/firmware/issues/4076.
Aft…
-
### Environment
- VerneMQ Version: 2.0.0
- OS: Ubuntu
- Erlang/OTP version (if building from source): 25.3.2.2-r0
- Cluster size/standalone: three node
### Current Behavior
When I conne…
-
### What happened?
I flashed the SLZB-06M with the latest official firmware, witch is a 7.4.1 version.
I tried after the SMLIGHT support ask me to flash with https://github.com/darkxst/silabs-firmwa…
-
### 硬件:
ESP32+ESP32C6
### 软件:
[esp-thread-br](https://github.com/espressif/esp-thread-br)
### 情况:
我尝试在**esp-thread-br**示例项目中添加mqtt组件,但当它运行之后,mqtt组件会出现 **Host is unreachable** 不可达的提示。此刻wifi是正常…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Betreibe das Teil an einem Deye Inverter. Signalqualität über 90% bzw. -53dB
Habe das merkwürdige Problem, dass nach 1-2 Wochen irgendwann keine Daten mehr per MQTT kommen.
Versucht man aufs Webinte…
-
**What would you like to be added/modified**:
I used the eventbus ->rest function and found that wildcards are not supported.
For example, the topic configured for eventbus is "/test123/#", and …
-
What is your opinion on adding a Router for handling MQTT messages from clients?
Something very similar to the Vert.X Web Router.
Potential usage:
```
MqttServer mqttServer = MqttServer.creat…
-
Hello, according to the Docker configuration file, after I made the configuration, I was unable to connect to and access testamate on the intranet, and I also couldn't see data on Grafana. I would lik…