-
Per @fj-blanco -
> right now wolfSSL seems like the only way to go for DTLS 1.3 (interesting for PQ for example). But wolfSSL's MQTT-SN is just the client, right? As far as I know, there's no Gatewa…
-
Hi there,
I am trying to setup Thread network with MQTT-SN over it and I came across your docker for paho. I've been trying to follow instructions provided here https://github.com/kyberpunk/openthr…
-
I am using https://www.eclipse.org/paho/clients/c/embedded-sn/ as mqtt gateway due to latency constraints. Need this project to support MQTT-SN protocol.
-
I have finished mqtt connection between my mqtt-sn client device and mqtt-sn gateway, everything is ok but when I tried to make my cli device publish "sensors" message, it failed.
Logs are below.
![…
-
Hi,
I'm trying to publish a message on a specific topic directly on mosquitto (using mosquitto_pub), and I want it to be transfered to the MQTT-SN gateway's client which is subscribed to that topic.
…
-
```
cmake .
make
```
results in
```
[manuel@uriziel build]$ make
[ 3%] Built target common_obj
[ 3%] Built target paho-mqtt3c
[ 4%] Built target lib-mqtt-sn-platform-abstraction-layer
…
ghost updated
4 years ago
-
I wanted to run only EMQX SN gateway server and wanted to bridge SN gateway to my backend MQTT server. Is it possible?
-
I use this as my gateway https://github.com/eclipse/paho.mqtt-sn.embedded-c/tree/master/MQTTSNGateway
but it seem my client can't connect to the gateway at all, am I missing something here?
is i…
-
That's the easiest option for now. We can add MQTT/MQTT-SN gateway on top of that. We can also reuse the part of this gateway when implementing full broker.
Actually, that's pretty big task, and I wi…
-
Hello,
I am currently using MQTT-SN client to connect to MQTTSN gateway. I have my client connected with a keep alive time of 30 seconds.
So during no activity if my mqtt-sn client is unable to sen…