-
Trying to run fernly ("firmware.bin") results in anything that tries to access the watch's (really "phone's") usb serial port hangs/gets REALLY slow. There is no fernly prompt.
Output from running …
-
Well, at the very least it's wrong for my two specimens.
"FERNLY_USB_LOADER_ADDR" should be defined as $1000a5b0, not $7000c000. How do I know this?
Well, I spent the _entirety of last night mes…
-
i am using your repository to build firmware for MT2503.
I read README.md and did what it said but when use "make u" to build project in step "Building track" show me error in track.log:
```
------…
-
-
Hey!
I've been playing with the Cicada (2g v1.2) (thanks to the Okra guys in Phnom Penh for hooking us up!) - and have been struggling to get any proper response from my AT commands to it.
- I'm …
-
The default 2G modem on the ZeroPhone, SIM800L, runs a firmware on its Mediatek CPU - the firmware performs low-level GSM tasks, as well as interfaces through UART using AT commands. The firmware is u…
-
Dear:
Is it work without Freertos?
I really need your help.
Thank you very much!
-
I am following the [Porting to a new platform](https://github.com/tensorflow/tflite-micro/blob/main/tensorflow/lite/micro/docs/new_platform_support.md) guide. I created directory tree containing only …
-
Hi,
I have Ai-Thinker's A9G board, it works well with Ai-Thinkers firmware, AT commands, GPRS, GPS, Internet, all stuff.
I registered its IMEI on your website.
Then I flashed [Logicrom core](http…
-
hi
I'm some confused as this project has no any document or help to use.
it must be very good if you put an example command use for flashing some file...