-
Since we're pretending to be an Espruino Bangle.js ... the message formats that we can support are documented here:
https://www.espruino.com/Gadgetbridge
There are a few that are not yet supported t…
-
OS: Debian10 buster
Env: Visual studio Code w/ PlatformIO(Home v3.0.1 Core v4.1.0)
I follow the tutorial in this link:http://longan.sipeed.com/en/get_started/pio.html
and I download example code …
-
Hi, Guys
I have a very strange issue when add some lines in the void setup then then get this message
Attempting MQTT connection…failed, rc=-2 try again in 5 seconds
int R1 = D0;
int R2 = D1;
…
-
**Describe the problem you have/What new integration you would like**
The Lyligo T5-4.7inch is a great e-paper module based on an ESP32. It has a resolution of 960*540, 16 gray level and support …
-
Feel free to post useful resources, suggestions or show off your projects here. Older comments of this nature can be found in #21 .
-
Freely discuss your opinions on an ARM platform for Grbl, moving forward after v1.1.
-
This project looks exciting, but I'm failing to get it to work on my T-watch.
Installed the firmware successfully, using Thonny as suggested (nb I'm on a Mac). Incidentally, this ends up with a `bo…
-
Followed all the instructions in flashing the ESP32-S3 dev kit (Panlee is the only project available for it it seems) and I'm not able to set my wifi SSID/password, no dialog comes up, I've reset the …
-
hello I built an energy meter of 3 faces with pzem-0004T v3 and I have the problem that the faces reset the accumulated energy after the 60kw approximately.
is a bug? thanks
https://youtu.be/ekmTV…
-
## Current Behavior
While flying on two occasions, the link was lost at close range, and even once the aircraft crashed/landed and the TX was within 10ft, the link was not re-established. Power cyc…