-
Is there a way to run the calibration method without influxdb?
When I originally made the pull request to turn this into a class (https://github.com/David00/rpi-power-monitor/pull/62) for a Mycodo …
-
### Describe the problem/bug
DS18B20 Temperature sensor stopped working overnight and got stuck at 0C. Config page for w1thermsensor shows two "00-00000000." device ID
Tried a config page for OW-S…
-
### Versions:
- Mycodo Version: Mycodo v8.16.0
- Raspberry Pi Version: 3B+
- Raspbian OS Version: Debian GNU/Linux 12 Release: 12 last one of this moring with Pi imager
Hello,
sin…
-
This is my experiment with using docker and docker-compose to run Mycodo. Thus far I successfully have Mycodo running fully in docker containers. This includes the Flask/Gunicorn frontend, Nginx, Infl…
-
### Describe the problem/bug
When trying to add a camera I am unable to see any cameras using opencv. I have a generic USB camera plugged in. I have written a script to see if any cameras are a…
-
### Describe the problem/bug
I'm trying to run 2 BME680 on the same i2c bus via master/slave (both sensors recognized by Pi on adresses 0x76 and 0x77).
Set up 2 inputs with the respective adresse…
-
**Is your feature request related to a problem? Please describe.**
Yes, the feature request is related to a problem. Currently, it is not possible to integrate Zigbee devices directly into Mycodo. …
-
Monitoring is key to any good regulatory system, with redundancy often used to accomplish this. This may be useful for remote operation or where great liability is involved (e.g. keeping things alive,…
-
### Describe the problem/bug
The GP8XXX Devices can be set from 0-10V. If you set it to 3.5V, the widget shows 3.5% though it should show 35%.
### Versions:
- Mycodo Version: *8.16.0*
- Rasp…
-
Currently to use the HiveBoard with Mycodo, you use quite a few different outputs and a function. i propose a single Output that contains all the different outputs, or all the outputs and the function…