-
In CID it is impossible to generate ions lower that around 0.3 of targeted ms. E.g. if CID mz is 700, then it is impossible to record ions below around 200. LUMOS method editor suggests the change if…
-
Hello,
do I need interrupt cirquit if I use MZ-700 which is fast enough?
and - do I need port DE if there is no addressing of it?
-
Hi
I just finished recapping my MZ80k and tried to load this awesome project onto an Arduino. I get all kinds of errors in the current Arduino IDE when I try to compile it. I then tried with downgrad…
ottj updated
2 months ago
-
While I'm now using Arduino IDE 2.3.2, I plan to add loading/creation of specific files to configure the input/output modules. I started with LCD_KEYPAD_SHIELD input where you may need to change the v…
hlide updated
2 months ago
-
I am using the board with Sharp MZ-700 computer (RGBS, Acorn Atom configuration; 320x200 , 15,625 Hz/60 Hz). Until recently everything was working fine.
I accidentally changed some setting and ver…
-
掌でX1を扱えるのは最高ですね。
CSCPのエミュレータにストレージ関連で気になる部分がいくつかあります。
どれも優先順位は低いので、お手すきの際に確認と検討をしていただけると幸いです。
1. ノーマルX1では2DDが認識できているようにみえるがちゃんと動作しない
多分、デフォルトで付いている2Dのドライブに2DDディスクを入れた場合の動作をエミュレートしているのだと思われるのでその制…
-
I thought to keep an open issue for this after chatting with a disappointed z88dk fan which hoped to be able to use fopen, etc. On the c128 target port.
At the moment no file support is present. T…
-
# R - low-level interface
CP, Please review and assign to LS
Input data:
mZ and intensity are obligatory the other attributes are not
```
x1
-
https://github.com/floooh/chips/blob/05cd84e43a1070a16c4edbcaa53a761561b629b8/codegen/z80_gen.py#L342
This line looks incorrect for me.
Let me take an example. SHARP MZ-700 has an LSI which hand…
-
I would like to request a new feature for the above tool. This tool links different maps (samples) in a label free experiment. However, it is impossible to know which peptide feature comes from which …