-
### Is there already an existing issue for this?
- [X] I have searched the existing issues and there is none for my device
### Product name
Neo NAS-AB02B2
### Manufacturer
Tuya
### Model identif…
-
### What happened?
Battery status is unknown for these devices::
- https://www.zigbee2mqtt.io/devices/SNZB-02D.html
- https://www.zigbee2mqtt.io/devices/NAS-AB06B2.html#neo-nas-ab06b2 (Yes, it's be…
-
### Prerequisites
- [X] I have searched the issue tracker to avoid opening a duplicate issue.
### Description
I don’t know if this is even possible. I’ve done a lot of searching to try and configur…
-
Hi guys
Enviroment:
- NAS DS223J (source device)
- NAS DS1010+ (destination device)
I setup the nas ds223j for connect via ssh to ds1010+ with ssh-key and it works, but if i give this command wi…
-
### What is the issue?
Hi I am fighting with a sleep mode after installation of Tailscale:
After installing Tailscale, the device is not able to sleep.
OOTB behavior of the device is, it falls …
-
### Checklist
- [X] I am not using Home Assistant. Or: a developer has told me to come here.
- [X] I have checked the troubleshooting section and my problem is not described there.
- [X] I have read…
-
Hi
After updating to 8.3, my SR did not work anymore.
I have created it like this:
```
mkdir /srv/NasDrives
ln -s /dev/sda2 /srv/NasDrives/sda
xe sr-create name-label="My Nas Storage" na…
-
## Issue Description ##
Hi, I tried the tutorial at the following link to connect SRS gNB and SRS UE for band 3 as mentioned in the config file
https://docs.srsran.com/projects/project/en/latest…
-
### Company or project name
_No response_
### Question
My stack file : (it's working)
`
> version: "3.8"
>
> services:
> server:
> ulimits:
> nproc: 65535
> nofile:…
-
I have eMMC Booting, as in it boots and starts Stage 1, but fails to mount /dev/disk/by-partlabel/disk-sysboot-root
when targetting /dev/mmcblk0
if I target /dev/sda and put it on a usb, it works …