-
From https://github.com/openbmc/openbmc/issues/1064
`VERSION_ID="v1.99.1-82-gbfd622e-dirty"`
`4.7.10-f26558191540830589fe03932d05577957670b8d`
```
palmetto login: ftgmac100 1e660000.ethernet…
-
My Windows 7 x86 SP1 VMs are still a bit chatty on the network, partially because of NCSI being enabled by default. It would be nice if vmcloak turned it off at creation time.
-
dev-4.7 7b7b6e87d3d94dd7813f5ef288d2be9c890dce6d on a Palmetto
```
[19919.800000] ftgmac100 1e660000.ethernet eth0: NCSI interface down
[19919.800000] ------------[ cut here ]------------
[19919.8000…
-
Hello again!
I had previously suggested that we split the NCSI netlink interaction code into its own package to enable further reuse in the Go ecosystem. I'd be happy to do the work and also write …
-
Seen on palm5 in the ADL. Running a hacked up 4.9-ish kernel for pinmux testing. Recording for posterity.
```
[ 171.760000] ------------[ cut here ]------------
[ 171.760000] WARNING: CPU: 0 PI…
-
i looked at the code, i can see, only mctp over i2c code is available, but README doesn't say any thing about its availability, i just wanted to know if it is working and also if PLDM over MCTP, NCSI …
-
### Behaviour
I get the error `Error getting the IPv4 address of dns.msftncsi.com` when doing the NCSI test
#### Steps to reproduce this issue
1. Open WindowsSpyBlocker and do NCSI test
#### E…
-
Hi,
I am using the Tioga Pass Channel version from Wiwynn and I am trying to use the on-board Intel I210 with RJ45 connector for management, instead of using NCSI through the Mezzanine card (Mezzan…
-
I have a Portwell Neptune board that came with fbtp-2168080 loaded on it. When I downloaded the current facebook/openbmc, recompiled for meta-fbtp, and loaded on the board, I get the following error…
-
There's apparently a registry setting to disable Windows' active probing of an interface's internet reachability:
https://www.trishtech.com/2015/07/disable-active-internet-probing-ncsi-in-windows/
…