-
Der EK-24S10EB von NEEY unterstützt einen maximalen Balancestrom von 10A.
Aktuell (v0.7.0_9t) kann unter Bluetooth Schnittstellen nur der EK-24S4EB ausgewählt werden, welcher unter Bluetooth Device b…
-
Hi, I have a NEEY 10A balancer connected via ESP32, but it behaves strangely because it doesn't pull data to MQTT regularly but there are some failures, I tried other ESP32 manufacturer but nothing he…
-
**Setup:**
2x Seplos BMS (nicht mit BSC) verbunden mit je einem NEEY 4A Balancer
Beide sind im BSC (auf ESP32-wroom Dev Board) auf BT ID 0 und 1 eingetragen.
**Problem:**
Der Neey auf ID 0 …
-
https://github.com/NEEY-electronic/JK/blob/JK-Balancer/Jikong-Balancer-RS485-Communication%20Protocol.pdf
https://github.com/jblance/mpp-solar/blob/master/mppsolar/protocols/jk485.py
```
TX -> 55…
syssi updated
3 months ago
-
Hi,
I have a few Shelly devices that can be use as Bluetooth proxy to HA. IE Shelly smart Plug S plus.
Have anyone used the Shelly devices to access NEEY active balancer or JK-BMS or other devices…
-
Thanks for the project! And the Neey balancer one! (And for the generous FOSS work overall
archi updated
2 months ago
-
Hello,
Is there any chance to add Heltec/Neey balancers over BLE ? As far as i know ESPhome already support those devices:
https://github.com/syssi/esphome-jk-bms/blob/main/components/heltec_balance…
-
[DR01_16S100JC03_V2 0 0_T1_V.zip](https://github.com/mytest4u/BMS/files/10551424/DR01_16S100JC03_V2.0.0_T1_V.zip)
Damit funktioniert auch DIP 5 und 6 nach oben für den Masterpack wie in der Anleitu…
-
Hello and welcome.
I have a BMS as in the topic and it works with seplos ver2.0, but not everything is decoded correctly. Send data:
~25014642E00201FD30
answer:
~25014F4280800001 0E 0DD2 0DD2 0DD3…
-
Hi, can someone tell me what the config should look like if I want to monitor two Neey Balancers?