-
i use this on a waveshare rp2040-one, and it works great (on 5.8; 5.10 seems to be broken on every application and os i tried) but currently the onboard neopixel is configured to flash red at max brig…
-
Something is wrong with the Python or NodeRed scriptfor the Neopixels slider. In the earlier lesson with the LED Slider some Wifi code was missing.
With the Neopixel Sliders often the script don't co…
-
Hello I am having a problem with my Manta M8P V1.
The neopixel LEDs light up partially or they light up in the wrong color or do not go out at all.
I didn't have this problem with my octopus V1.1 ca…
-
**Describe the bug**
I cannot use more then 60 pixels when I am trying to use my neopixels from my device.
***Arduino board***
Raspberry Pi Pico W
**To Reproduce**
Steps to reproduce the beh…
-
I can't get any neopixel running on my mp8/cm4. Using klipper.
Rest works like a charm.
I defined both channels in printer.cfg with the probably correct pins. See them in the dashboard. There I…
-
(Request) here is more granular control and static colour assignment of any neopixels wired.
(Background)
Currently you can only select first 3 neopixels for static colour configuration, leaving…
-
It appears that the neopixel install returns the error:
`error: externally-managed-environment
× This environment is externally managed
╰─> To install Python packages system-wide, try apt insta…
-
There is something that I feel should be added to the documentation for the neopixel module that will greatly help people that are working with large LED strips or LED arrays. The refresh rate is not …
-
I am running into an issue where after upgrading the ESP32 package from 2.0.17 to 3.0.x, Neopixel sketches with an LED count of 76 or more get into a crash loop
I am using the Adafruit_NeoPixel '[s…
-
Just a note, had to switch out the neopixel library/class for neopixel_spi and connect to MOSI pin as RPI5 doesn't support neopixels via standard GPIO anymore. More info at https://learn.adafruit.com/…