-
This is a fresh install of nexmon firmware. It is loaded right after boot, but it is blind immediately. Unles…
-
Greetings
Thank you for proposing this excellent project. However, I found that the noise data, which is important in calculating the SNR, do not include in nexmon_csi. I notice that fwil_type.h in…
-
# Summary
Hello there!
I installed nexmon firmware to my Nexus 6P. Because I use magisk to root and **installed Kali Nethunter by Magisk**, the `/system` is read only and I changed the utils install…
-
Thank you for this amazing work! I have a question about parsing CSI and **RSSI data** using `csiread`. If I know that the CSI data was collected using RPi 4B using [this](https://github.com/nexmonste…
-
BUILDING DRIVER for kernel 5.10 brcmfmac_5.10.y-nexmon/brcmfmac.ko (details: log/driver.log)
make[1]: *** No targets specified and no makefile found. Stop.
make: *** [Makefile:50: brcmfmac.ko] Erro…
-
Hello,
What would be the level of effort involved in porting Nexmon CSI to the Pi Zero 2 W? And the core steps/changes required?
It seems like a great target for Nexmon CSI because it's pretty m…
-
Original bug report: seemoo-lab/nexmon#32
after loading Nexmon on Kali (on a Raspberry Pi 3) and successfully getting packets in monitor mode, I noticed the system seems to get the following messag…
-
Hello @zeroby0 ,
Very excited to see your work, I too would like to extract RSS and CSI from `.pcap` file at the simultaneous, I am getting my data from AC86U router.
I used MATLAB to read it and …
-
hello,
my kernel version is 4.19.97 but when i try "https://raw.githubusercontent.com/nexmonster/nexmon_csi_bin/main/install.sh | sudo bash" it shows this error
pi@raspberrypi:~ $ uname -srm
Linu…
Arr76 updated
3 months ago
-
every once in a while, nexmon dies with:
```
[ 4341.527847] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4101, -110
[ 4344.327806] brcmfmac: brcmf_cfg80211_nexmon_set_c…