-
Hi Guys, I have recently migrated over to the myUplink service for my NIBE heatpump as they are decommissioning the old uplink in August. I was wondering if anyone had any success in adding thermostat…
-
Hi Emil
I see when login in to NibeUplink online that they offer an migration to MyUplink.
And i wonder if this integration will go down after a while and if it is possible to get the same funct…
-
I have a Nibe F750 - which was running Nibe Uplink and was upgraded by Nibe to…
-
### The problem
Hi,
I've enabled a lot of sensor from my Nibe Heatpump.
A few of them are interesting to plot as a graph.
I can make a helper to convert these values to floats or integers.
But …
-
I'm using your great Nibe Uplink for years now and was happy to find a new app for the new myUplink, but I can't get it done.
- The installing part for directory NIBEmyUplink plus pip3 comaand went…
-
Nibe Wärmepumpen können über das Nibe Modbus Modul 40 ausgelesen und gesteuert werden. Alternativ funktioniert es über einen Raspberry Pi. Hier ist eine Lösung für Node-Red zu finden:
http://hausbau-…
-
Hi, first off thanks for your hard work and very nice integration to myUplink!
I have a F1255-16 with the upgraded firmware to be compatible with myUplink instead of Nibe Uplink.
Everything look…
-
Could you provide an example e.g. in the readme.md of how one could change the scan interval for this addon (other than forking the repo myself and changing DEFAULT_SCAN_INTERVAL and MIN_SCAN_INTERVAL…
-
Wonder if its possible to add in "Then cards" for changing DM, Hotwater setting (economy, normal, lux) and the temperature setpoint for room-heating.
Nice app btw! Lot of feedback from the Nibe uplin…
-
The fan speed in myUplink does not show the actual speed in percent (%), as NIBE Uplink does. It only shows the mode (0, 1, 2, 3, 4) where 0 = normal.
The integration shows it in %, so it will only…
mapaq updated
8 months ago