-
Hi,
First, I want to thank you for this awesome project. I am running a couple of split keyboards with NiceNano clones and wanted a solution to enter LUKS passwords wirelessly. The process for sett…
-
I spent a week building the keymap for my new sweep keyboard. Then painfully realised that when I created the old repo, I put the wrong version of nicenano!. So I have to create a new repo, but it'll …
-
Hey there… curious if I would need to do any modification to the promicro brackets to accommodate a nicenano. Playing with the print I have, it seems a little low in the provided USB hole in the case.
-
I built tinygo from source as per official documentation (on gentoo here)
tried to run ping pong example on nicenano
```
$ sudo ~/go/bin/mecha flash -i wazero -m nicenano
Building TinyGo module p…
-
While basic support was added in [this PR](https://github.com/zmkfirmware/zmk/pull/836), documentation on how one would actually configure dongle mode has not been created.
Goals of issue:
- Crea…
-
First thanks for this great tool, but I have problems finding my key under `Services\BTHPORT\Parameters\Keys` The device MAC is not listed there.
It is under `\BTHPORT\Parameters\Devices\` but under…
-
```[18036.977115] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[18062.856072] usb 1-4: USB disconnect, device number 24
[18062.857649] blk_update_request: I/O error, dev sdc, sector 517 op 0x1:(WR…
-
Part two of the "Josh had to rebuild his keyboard" saga: the discovery that the KMK codebase is so big, it can't be copied in full to even a NiceNano (which, back in the day, was one of the biggest MC…
-
add pullups to I2C SCL and SDA Lines (~2.2k is good). footprints may stay unpolulated if Nano V2or OLED contains pullups.
