-
https://github.com/labbots/NiimPrintX/blob/e51cf57b19fda8de66632ab063784df1c359fd5f/NiimPrintX/ui/AppConfig.py#L56
I am trying to get it work with my Niimbot b1 but UI wasn't showing it under devic…
-
I'm using niimbot b1, the source image is 320x480px in size.
As per photo, it seems like only the top third of print area is used.
The label size is 40x60mm
![E662CDC6-5D1B-4720-9B91-ED43347B…
-
When I try to print any image, the the printer just prints an empty label with nothing printed on it.
Printing from the app works correctly - so it's not a hardware issue.
This is a B1, firmware ver…
-
I've the D11_H version with 300dpi and when I print I get the error message:
`unpack requires a buffer of 4 bytes.`
Print output is then just a empty label with nothing printed on it.
-
I have two Bluetooth printers (Niimbot B1 and IDPRT), and both connect, but when I send the test or something to print, I see this output, but nothing prints. Any clue what it could be?
D/Bluetoot…
-
There is a list of tested models.
If you own other model or you have issues with model listed here, please write a comment.
You can test your model with the [niimblue](https://github.com/MultiMote/n…
-
EDIT: Read first. Thanks to findings by @MultiMote it appears the printer itself stores the tag serial number as well. So the methods described bellow are not working.
Been playing with my printer…
-
D11 (and other devices maybe?) actually supports USB connection (as CDC ACM serial device, and uses same packet). But currently niimprint is hard-coded to use Bluetooth serial.
-
Do you know the B1 printer support the ZPL protocal?
If not is possible to create a feature to translate ZPL to niimbot protocol?
-
This is a meta-issue for collecting traffic captures of an official app communication with various printer models. Preferred export format is JSON (if you're using wireshark: file > export packet diss…