-
I've the D11_H version with 300dpi and when I print I get the error message:
`unpack requires a buffer of 4 bytes.`
Print output is then just a empty label with nothing printed on it.
-
https://github.com/labbots/NiimPrintX/blob/e51cf57b19fda8de66632ab063784df1c359fd5f/NiimPrintX/ui/AppConfig.py#L56
I am trying to get it work with my Niimbot b1 but UI wasn't showing it under devic…
-
This is a meta-issue for collecting traffic captures of an official app communication with various printer models. Preferred export format is JSON (if you're using wireshark: file > export packet diss…
-
There is a list of tested models.
If you own other model or you have issues with model listed here, please write a comment.
You can test your model with the [niimblue](https://github.com/MultiMote/n…
-
D11 and B21 please ;)
-
Hey again, what devices are you using this with ? I could make it kinda work with the D110 but alignment was always off, so I an curious what device you are using
-
Hi there, really cool that you managed to figure all this out.
I'm trying this on a B21, and when I try to print an image with a width of 96px, it comes out in the center of the label, rotated the …