-
In the setup function in `sketch.ino.cpp` we find the following code:
```
pinMode(5, INPUT);
if (digitalRead(5) == LOW)
{
setupBluetooth();
}
else
{
setupWiFi();
}
```
I don…
-
Hi!
I am trying to send simple data from the GAP8 chip to the NINA chip via SPI on the AI-deck board using FreeRTOS. The Wi-Fi example available on the [AI-deck repo](https://github.com/bitcraze/AI…
-
Arduino Nano 33 IoT (Arm® Cortex®-M0 32-bit SAMD21) support requested due to identical issues with Nano 33 BLE while using the onboard WiFi/BLE (u-blox NINA-W10) -> interrupt issues with standard meth…
-
If I've understood correctly, the 1010 would work with the mkrzero code. But I need to use bluetooth, which works differently than on any other board on the 1010. How would I port that to Rust?
-
### Board
NINA-W101, NINA-W106
### Device Description
EVK-NINA-W101 from u-blox
### Hardware Configuration
ESP32 I'm running the v2.0.15 (Not listed in the Issue form)
https://www.u-blox.c…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
pip
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32
**ESPHome version (latest production, beta, dev branch)**
v1.14.5
**A…
-
Hi,
I program the XPLR module from the Arduino IDE I received this message
do you know how to fix that?
17:00:14.256 ->
17:00:14.256 -> rst:0xc (SW_CPU_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT)
…
-
Hi @daschl (Michael)
Can you identify why i am getting this error ?
I tried on PC and MINGW, same problem!
![image](https://user-images.githubusercontent.com/11488460/96585378-e842bb00-12b5-…
-
Hey. I ran into a problem. The program does not allow me to compile my project. An error: 'D2' was not declared in this scope.
#include
#include
#include
#include
#include
#include
#i…
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…