-
It was raised in conversation that either the NMRA, Rail Community or both have defined a set of standard icons and their numbers. This could be referenced in the FDI, via a new element, to hint to a…
-
### Brand
ML-Train
### Model
DRIVE-M with SUSI 4A [84004501]
### Type
Multi-function with sound
### Type (other)
_No response_
### Firmware
No idea, I didn't change the default. If you can te…
-
Hi,
Thanks you for this libray, i used with Nano, Mega and Due.
I will use a beetle DFR0282 ATmega32u4 looks like as a Leonardo.
Is this libray compatible with this?
regards
andy
-
Luca, thankyou for sharing.
Did you foresee to port your code on an ESP32 ? I tested on a ESP32 DevKit1, I had no output.
The same device is ok withe DCCpp-EX-inspector code.
I tried to find such a…
-
The latest NMRA and RailCommunity standards allow for each Bi-Directional (RailCom) capable decoder to have a universally unique and immutable 44-bit ID assigned to it from the manufacturer. The forma…
-
CVReader (https://github.com/Asbelos/CVReader) implements a length check on the ACK pulses to ensure that they meet NMRA specs and are not just a fluke. In just a few lines of code this check can be i…
-
Hi Stuart. The DCC-EX team is a bit concerned with the RCN-212 spec merging into the NRMA spec and wanted to know the proper method/forum to discuss what will be adopted. In particular, there are 2 pl…
-
Enable H-bridges to be driven externally from an opto-isolated booster board. This cannot be done through timers and interrupts because they are not fast enough to achieve NMRA booster spec. Instead, …
-
wiThrottle should support DCC decoders with 28 speed steps.
There should be a selection after the DCC address with at least the options "128", "28" speed steps.
May be this could extended to all o…
-
module-deps currently contains logic that results in excluding files from transformation if any segment in the file's package-relative path is the string "node_modules". This logic lives within the `…