-
Hello, please answer me NodeMCU V3 WI-FI ESP8266 (CP2102) or NodeMCU v3 Lua WI-FI ESP8266 (CH340) which is better for your repository? but maybe you can tell me a more precise configuration, if it mat…
-
> Have you searched for existing (open and closed) issues describing the same problem?
Yes
**Describe the error**
whenever i try to upload the deauther code to my nodemcu board it just throws t…
-
Hello.
I want to make DİY_ESP32 with NodeMCU ESP32s.
I used L298 as motor driver.
Where should I connect the CH_PWM_L1/ L2/R1/R2 and PIN_PWM_LF1/LB1... pins? I don't understand this.
When CH_PWM…
-
Hi,
I have a ESP32-C3-PICO-A that doesn't use USB for serial, so I use a FTDI for serial. I have it loading the ESP32 C3 with this code
`Connecting...
Detecting chip type... ESP32-C3
Chip is …
-
### Device
Lolin
### Version
1.18
### Bug description
Hello. I wrote a subclass of NTCSensor and when compiling the linker it throws an error:
```
Linking .pio\build\nodemcu-lolin-analog-mux\fi…
-
I have NodeMCU ESP32S V1.1 Module (ESP WROOM32) and the advertising range is less than 40cm's how can I fix that?
iOS Version: 18.1
-
Hello.
Flashed esp-link latest stable ver to NodeMCU v3 with CH340 chip.
Flashed nodeMCU works in such ways:
- Web interface works;
- WiFi works;
- Terminal communication trough builtin USB por…
-
### The problem
The LD2420 sensor works fine with the NodeMCU. But when I connect to a MQTT Broker with esphome then I get weird values.
The values are jumping very high and then back again. Why cou…
-
How would this work on a NodeMCU? I don't see where in the sketch to change the pin number. The comments mention pin 2, but there isn't code that sets pin 2.
-
can you help me convert it to nodemcu esp-12e using ESP.getVcc();
thanks