-
Hi!
I got back to my old project add more functionality to it and I update all my libs including nrf-modem and then tried creating a DtlsSocket. I am pretty sure that works working fine before but no…
-
研究一下nrf 最新的connect sdk。看是否可以用得上
-
**Describe the bug**
While using display driver display_gc9x01x with Waveshare GC9A01A round display module, the color inversion is set on by default. Absence or explicit deletion of "display_…
-
**Describe the bug**
When using MODBUS I get warnings that "err" is not initialized.
This is a non-critical warning, but it would be nice if this could be corrected in the next release.
**To Repr…
-
**Describe the bug**
Using nRF Connect SDK 2.7.0 with an nRF5340 DK, the example in https://github.com/zephyrproject-rtos/zephyr/tree/main/samples/subsys/usb/uac2_explicit_feedback fails to start a…
-
Before submitting a bunch of PRs under "librarry, it's probably worth considering adding for hardware. Or should these go under Framework? Here's the relevant ones of the top of my head:
* https://gi…
-
First of all, thank you very much for providing this example!
I am using the nrf connect sdk 2.7.0 to build this project and that fails with the following log output:
```
*** Booting nRF Connec…
-
Hello! After last update nor iPhone nor MacBook can't do dfu update. Speed as low as 0.1-0.2kB/s and no image recognition. Tested on a large fleet of devices.
nRF Connect 2.7.6
nRF52840 (mcuboot com…
-
I've been having issues with implementing this library, but have found that the issue persists outside my implementation, and in fact happens with both the version in the Playstore as well as local bu…
-
**Describe the bug**
I'm using Zephyr (NCS) on a custom nRF52833 board, and am using the USB CDC ACM driver in the USBD_NEXT stack. I have my own binary packet protocol going over the virtual …