-
I have pv12805hz18f round touch panel, cst816d and nrf5340 devices.
I've connected devices but touch panel is not work correctly.
I think you have full experience with nrf.
Please help me.
Thanks
…
-
I'm quite familiar with the nrf52 family and I used the SoftDevice extensively in C and I did some fairly simple work in Rust using embassy-softdevice.
Recently I started looking into the nrf5340, an…
-
In order to start the `cpu-net` core on the nRF5340, the `cpu-app` core must clear the bit `FORCEOFF` of the register `APPLICATION.RESET.NETWORK`.
See
![image](https://github.com/user-attachments…
-
Hi! I'm wondering whether it would be feasible to add nRF53 support to BMP.
The nRF5340 is a little bit different than the others though, so I'm not sure if this is compatible with BMP's architecture…
-
**Describe the bug**
Board fails to build, see https://github.com/zephyrproject-rtos/zephyr/actions/runs/10918300637/job/30303866778?pr=78621 for log
**Expected behavior**
CI to not be broken
…
-
Bluetooth sample peripheral_hr fails `bt_enable` on nrf53 with sysbuild.
```
bt_hci_core: opcode 0x0c33 status 0x12
Bluetooth init failed (err -22)
```
Cause: Value differs between images:…
-
Hi,
struggling with flashing nRF5340.
If I flash it manually with J-Flash Lite, first NET then APP core, it works fine.
I need to flash both cores with no reset between them, NET and APP respecti…
-
Building drivers/src/nrfx_dppi.c with clang for the nrf5340 results in the following warning:
```
drivers/src/nrfx_dppi.c
drivers/src/nrfx_dppi.c:65:47: error: shift count >= width of type [-Werror…
-
Originally posted by @JohnConnett in https://github.com/kardia-as/zigpy-zboss/discussions/43 under discussions section https://github.com/kardia-as/zigpy-zboss/discussions
> _**I have an nRF5340 DK…
Hedda updated
3 months ago
-
With the minimal example below, I can't get any output from uarte. Anything more complex trying to read or using BufferedUarte doesn't work either. I'm using nrf5340-app-s and embassy from git with th…