-
If I add the following config to `launch.json`
```
{
"type": "mcuxpresso-debug",
"name": "MCUXpresso Project",
"request": "launch",
"cwd": "${workspaceFolder}",
"executabl…
-
LPUART0, used for the debug console and shell, does not receive characters. It does transmit, and will print to the terminal.
To replicate, the sample samples/drivers/uart/echo_bot shows the issue…
-
**Describe the bug**
`nxp,flexio-spi` appears to not work on the imxrt10xx series, I had tried on my actual project board (imxrt1040 based) to use it in place of the LPSPI to avoid some undesirable b…
-
Is there CANopenNode available for NXP MCX/(LPC) device or there is instruction turorial/steps neeed to bring up CANopenNode for these NXP MCX device?
-
## Origin
The following binary blob is being added: `mcxw71/mcxw71_nbu_ble_15_4_dyn.sb3`
## Type
- [ ] Precompiled library
- [x] Firmware image
## Module
hal_nxp: https://github.com/ze…
-
I am evaluating embedded-test using an [NXP MIMXRT685](https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt600-evaluation-kit:MIMXRT68…
-
In a fresh environment using the following:
branch=scarthgap
MACHINE=imx8mm-lpddr4-evk
DISTRO=poky
Image=core-image-minimal
local.conf additions:
IMX_DEFAULT_BSP = "nxp"
IMX_DEFAULT_BOOTLOADE…
-
As mentioned in cmsis-svd/cmsis-svd-data#18 the acquisition of NXP changed a few things and the included SVD files are incredibly out of date. I'd be happy to provide some updates via PR but the quest…
-
**Describe the bug**
When compiling the Zephyr sample project for the mimxrt1170_evk board with the NXP_88W8987_MURATA_1ZM_M2 WiFi module, the build process fails due to a missing `board.h` file.
…
-
As detailed in https://github.com/nfc-tools/libnfc/issues/455#issuecomment-2221979571 , the NXP chip in my Lenovo Yoga X1 Gen3 needs some additional configuration commands to operate in a stable mode.…