-
Hi, i m tryng to connect to my Seat but i recive some strange data, i have also triple checked the connectio and tried to swap tx and rx
I connect the cable to OBD port and RS232 to my laptop, afte…
-
Hi Guys,
I cant put finger on the issue. because my code was running all okay. which suddenly started giving timeout error. Code is not able to pick up port and run commands. which was working prop…
-
can i get help
`Ports:
['/dev/rfcomm0']
[obd.obd] ======================= python-OBD (v0.7.1) =======================
[obd.obd] Explicit port defined
[obd.elm327] Initializing ELM327: PORT=/dev/…
-
Hi, it is not clear to me if and when the monitoring system can check the status of the car even when it is turned off.
I am interested in seeing the battery growth during charging when the car is o…
-
I'm having trouble making a stable connection to my OBD and am confused why - despite seeing the ports it either throws a _Failed to choose baud_ or with a given baud, _Failed to read port_ (though it…
g4b-y updated
3 years ago
-
Hello,
in my case there is a problem with the baudrate. The program connect to the OBD-adapter but then there comes an error:
`
[obd.obd] =================================================…
-
### Board
ESP32-D0WDQ5
### Device Description
No hardware, directly connected to Mac for power and flashing.
### Hardware Configuration
No hardware, directly connected to Mac for power and flash…
-
I discovered when there are more than a single available port, the connection fails. In this example I have COM2 opened and waiting for the obd to connect. COM3 is also active and has no relation to o…
-
1
I'm trying to connect my linux with the car using an USB OBD-II device, it connects to the OBD-II device but not to the car. The software OBD Auto Doctor https://www.obdautodoctor.com/ connects j…
-
I am trying to connect to a Bluetooth obd2 reader and I am getting stuck on Initializing ELM327: PORT=\.\COM3 BAUD=auto PROTOCOL=auto. Not sure why this is happening. I can connect to it with scan too…