-
Hi,
I am using this library to connect to an OBD device on a car. I have managed to get this working in the ionic framework, I can send requests and retrieve responses however when I send data I then…
-
at begin - thank you for great project.
Normally I use Arduino IDE, and here with platformio I can not find definintions of pin used to communicate with display...
I searched code for all "MISO" …
-
I've been investigating add VIN support to the vi-firmware stack. My end goal would be to implement a command similar to the vi-firmware Version and Device ID. So in the Android Enabler, you would see…
-
### Board
ESP32-D0WDQ5
### Device Description
No hardware, directly connected to Mac for power and flashing.
### Hardware Configuration
No hardware, directly connected to Mac for power and flash…
-
http://www.toyota.com/owners/resources/owners-manuals/rav4/2017
-
Hello @collin80 ,
We are looking for using due_can library for our project, We have Arduino due and we are new to CAN protocol.
We need some clarity on how to use your library .
1. Is there any hardw…
-
Hello
ESP32 board does not connect with OBDII string name. Previously i used to connect with HC-05 and Nano but HC-05 is fragile.
Now I tried (some 100 tries) with esp32 and following code worked.
…
-
It does not work with macOS Monterey v.12.3.1 (MacBook Pro 15) . . . . . Why ?
-
I have something that might be of interest that can expand this library so it can support the full gambit of bitrates the interface is able to do.
Right now the only bitrates that are supported are…
-
This seems like a great platform. Is anyone following this? Not new to programming but I am no expert neither. Looking for a general foundation to get started on connection.
Any ideas?