-
## What is the feature?
It would be awesome if Better Thermostat supports occupancy sensors.
### Description
The logic would actually be very similar to window sensors. If there is no occupancy, tu…
-
As seen in the screenshot below, on a daily basis I am having issues where the zone I am standing in says Occupancy = 'Clear', Target Count = 1, and the Overall occupancy sensor says 'Detected'. You c…
-
As per the image below, Occupancy is showing as Detected, however there is no one in the room, no motion. Zone 1 shows occupancy Detected, count of 0.
There is a target being tracked, I am standing…
-
_Submitting this ticket after talking with Brandon Harvey about this issue._
I have my MSR-2 mounted on a post of the desk in my office. I'd like to be able to know if my office is occupied in tha…
-
- Belegungsdaten von BLS bereits vorhanden in OJP? --> CAPRE --> OpentransportData --> EFA
- Heute gibt es auf OJP 2.0 noch keine Daten
- Wann ist es bei SKI+ eingeplant --> hängt von der Prio von d…
-
Window Header: TMA/SI - Occupancy
As Topskys "STS -> Predicted Traffic".
In Stockholm one for entire TMA avbl (probably only APP AoR), also by position (E, W, S etc)
- [x] Data from VATSIMs …
-
- [x] Obtain scripts from Raffa
- [x] Run simulations on OSG or on the Farm
- [x] C++ ROOT histos to reproduce Raffaella and Mariangela results
- [x] Histos comparison
- [ ] Test beam shift on occu…
-
**Describe the bug**
When I add "24G radar" to Tuya app it has **move** **Occupancy** and **none** states.
However, in the home assistant integration, this device has only an **Occupancy** sensor,…
-
Hi,
I've been having a lot of issues with detection. I am having constant issues across 4 sensors where occupancy is both on when it shouldn't be, and off when it should be on. When occupancy is on…
-
Currently, naga exclusively generates `while` loops when translating code for downstream compilers. This:
- Breaks compilation of some shaders on FXC because loops can't be unrolled so arrays canno…