-
### The problem
I noticed the last 2 releases (0.84/0.85) throw a SEGV on Odroid-C2. 0.83 is works fine.
Seems to be triggered by receive :
```
[GIN] 2024/06/26 - 22:01:00 | 400 | …
-
So, I've made a stripped down image of ubuntu(2.2gb) that works on odroid c2 and hacked the scripts here together to make it work. I was surprised at how little compilation I had to do, ubuntu's aarch…
-
**CPU:** Amlogic ARM® Cortex®-A53(ARMv8) 2Ghz quad core CPUs
**GPU:** Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
**Memory:** 2Gbyte DDR3 SDRAM
**Features:**
- Gigabit Ethernet
- H…
-
Hi,
thanks a lot for adding Odroid support, but I've ran into several issues:
- lirios-init-build-env: for list_devices to work the directory seems to be wrong, it should be
$DIR/conf/distro/machin…
olluz updated
6 years ago
-
### Creating a bug report/issue
#### Required Information
- DietPi version | v8.0.2
- Distro version | 6
- Kernel version |
- SBC model | 12
- Power supply used | 5V 2A
- SDcard used | (EG: …
-
Would be great if we could implement into DietPi-Config to toggle it. Requires investigation which kernel modules/packages are required.
Also SPI and general serial device control would be fine.
…
-
I've done some basic work in trying to get the odroid C2 booting resin, however I'm not terribly familiar with the resin build system. Using the master branch of resin-odroid, and simply adding the *.…
-
**RancherOS Version: v0.6.1**
**Where are you running RancherOS? Raspberry Pi 2/3**
I have an Odroid-C1+ and an Odorid-C2 on it's way.
From what I can tell, Odroid-C1 should be supported in kernel …
zimme updated
7 years ago
-
Any plans by the OpenELEC team to officially support Hardkernel's ODROID-C1 and/or ODROID-C2?
I would think that supporting ODROID-C1+ and ODROID-C2 would not be that much different than WeTek device…
Hedda updated
8 years ago
-
I have two Odroid C2 here in California, and my friend has three in Indiana.
One of the odroid C2s here returns nothing when you type `blkid`. It's able to boot because I am just running an initramfs…