-
Hello, I am using ofdm-transfer recently. The project is now read-only. I have encountered the same problem you left in the issue page. I would like to ask how is your current progress on this project…
-
`D_tilde = demodulate_ofdm(z_tilde, fft_size, cp_size, switch_graph)`
Dur0k updated
4 years ago
-
(1) Why can we find two preambles using benchmark_tx.py + benchmark_rx.py?
(2) How to understand sig[0]?
(3) Sleeping in Tx leads to lower PRR in Rx, Why?
-
when I opened the file ofdmradar_test,there was some errors about the block :OFDM Radar System Parameters.it said
![Uploading image.png…]()
how could I modify it?
-
Recently, I am reading the core code about the frame detection described in your repository called SDR_Matlab_OFDM_802.11a_2.4GHz. But some parameters setting confuse me. To be exact, i do not underst…
-
The standard specifies in 3GPP TS 38.211, section 5.4 that during upconversion the phase of the oscillator is reset to 0 on the start of each symbol. Actually resetting the phase is not possible in mo…
-
`% Pilot inserted
[data_in_IFFT, data_location] = Pilot_Insert(Pilot_value_user, Pilot_starting_location, Pilot_interval, Pilot_location, Frame_size, Num_of_FFT, QPSK_signal);
[data_for_channel, ~] …
-
您好,我有个问题想要请教。
在训练数据生成的文件夹+Data_Generation中:
对于ReEsNet(或者InterpolateNet)的训练数据生成函数Data_Generation_Residual.m中第30行代码:
`[data_for_channel, ~] = OFDM.Pilot_Insert(1, Pilot_location_symbols, kron((1 : Nu…
-
The following failures were discovered on `main` during work on #12:
```
The following tests FAILED:
5 - tst_ofdm_mod_plain (Failed)
6 - tst_ofdm_mod_ldpc (Failed)
7 - tst_ofdm_demod_q…
tmiw updated
8 months ago
-
`import matplotlib.pyplot as plt
import numpy as np
import pandas as pd
from sklearn.model_selection import train_test_split
from sklearn.preprocessing import PolynomialFeatures
fro…