-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
Current master
### Description
Warnings generated during compilation
```
src/graphics/Screen.h:524:13: warnin…
-
Ansteuerung des Displays mit Python
Ziel: Anzeige der Informationen zu dem Cluster
* Nodeanzahl
* Temp
* Warnungen
* Stromverbrauch
-
It seems that when I compile I get this:
```
Arduino: 1.8.1 (Windows 10), Board: "WeMos D1 R2 & mini, 160 MHz, 921600, 4M (3M SPIFFS)"
C:\Users\User\Documents\Arduino\WIRELESS_UNIT_BDROOM\WIREL…
-
hello there is no define.h file in esp compilation
and I have errors:
Arduino:1.8.12 (Mac OS X), Płytka:"Generic ESP8266 Module, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most…
-
# Problem
Attempting to compile in the Arduino IDE results in the following error:
```
/home/user/air_gradient_open_air_firmware/examples/OneOpenAir/OneOpenAir.ino:40:10: fatal error: AirGradient…
-
I need to show two numbers on the display as large as possible.
Ideally 64 pixels character height.
I chose the **Open_Sans_Hebrew_Condensed** font http://oleddisplay.squix.ch/
I'm guessing size 80…
-
+ [ ] LEDblink
+ [ ] button
+ [ ] i2c-ADT7410
+ [ ] i2c-PAJ7620-Gesture
+ [ ] i2c-PCA9685
+ [ ] i2c-S11059
+ [ ] i2c-SRF02
+ [ ] i2c-VEML6070
+ [ ] i2c-grove-accelerometer
+ [ ] i…
-
-
Attempted to use the latest 2.5 and 3.0rc pre-built images, standard and thorrax.
I have flashed these with esptools and nodemcu without any luck. I've also used platformio.
I have also attempted to…
-
Hi!
Is it possible to use a lower version of QR code? With lower resolution/memory