-
After authentication, the screen is black, but on the left, next to the camera name and IP, you can see the screenshot taken by the camera.
The one that is written in the terminal after authenticatio…
-
Hi,
I am trying to use the onvif module of go2rtc, to add already existing camera in go2rtc to a hikvision dvr for viewing and recording.
I had to enable auth on the RTSP stream, because the DVR…
-
Hi,
I am trying to install onvif simple server for profile T bi-directional audio.
getting the below error, kindly let me know how to proceed from here
cc: error: extras/libtomcrypt/libtomcrypt.a: …
-
Firstly, I wanted to say thank you for creating this! Means I can carry on using some of my older, perfectly working cameras in Unify Protect now!
The docker instructions says
`All you need to do …
-
I use NVR with ONVIF and it does not display the stream if video1 is disabled.
Possible solution is to anounce only enabled stream as main stream and substream twice.
-
Hi all,
Using go2rtc 1.8.5 as port 1984 on a docker instance running on a Raspberry Pi 3. go2rtc works great with RTSP and HTTP streaming to tablets and to Home Assistant clients on my LAN (single…
-
Hello! I have an issue where both Synology and a hardware NVR can not seem to detect the motion detection capability of a camera running onvif_simple_server. On Syno there is no option to choose to ha…
-
### The problem
I have been using the ONVIF integration with a number of identical cameras. Arenti AInanny. They all worked out of the box with HA, once ONVIF was enabled. However since a firmware…
-
**Hi, I was trying to connect TP-Link tapo C220 ip camera with python, but I 'm stuck on a problem. Here is my code :**
import time
from onvif import ONVIFCamera
import zeep
impo…
-
I have a setup where if a camera is offline a 301 response is provided as a fallback, but it seems go2rtc has trouble following the redirect. The version is 1.9.4, these are the logs of the issue:
…