-
Open-source hardware projects are wonderful.
As an electronics and embedded software engineer and retrocomputing restorer, they are an integral part of my work toolkit. However, there’s a challenge: …
lazaj updated
14 hours ago
-
### Project description
OpenAPV will develop a royalty-free, open-source, open standard video codec for professional video capturing and post-production.
### Sponsor from TAC
Samsung Electronics
#…
-
### Checklist before submitting an issue
- [X] I have searched through the existing [closed and open issues](https://github.com/elkowar/eww/issues?q=is%3Aissue) for eww and made sure this is not a …
-
I'm building a robot, which is suggested to be compatible with the opencat software. Here: [https://www.personalrobots.biz/spotmicro-is-an-open-source-robotic-dog/](url)
Though it uses an Arduino m…
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
Hi @adnovea
great project! 😍
i'm sharing it on my own "Safety & Health" project
https://github.com/aeonSolutions/AeonLabs-Safety-Health/wiki
👍
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Cure depreciated several scripts from: https://github.com/mriscoc/Ender3V2S1/wiki/Calibration-Gu…
-
They are files named Mechanical Design in the Mechanical folder and PCBschematic in the Electronics folder. They can be open by any PDF viewer. Would appreciate any comment e.g. this looks dumb, pleas…
-
Hi @upiir ,
great DIY tutorials!
I'm sharing your project on my own "Open Hardware Electronics for Volvo P2 platform" project :
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardwa…
-
The BOM for electronics has been pushed in a non-open format. It would be nicer to have this file as an open document (.ods) file.