-
"Open hardware"
"open source hardware"
"open science hardware"
"open labware"
"free and open source hardware"
"low cost"
"frugal"
-
From the template,
> 1. Design files
> [The complete design files must be either uploaded to an approved online repository, uploaded at the time of submission on the online Elsevier submission i…
-
### Overview
When running Labware Position Check the pipette will collide with labware higher than the exiting height from the trash.
Seen with OT and Opentrons App v6.3.0
Seems related to #125…
-
# Overview
While h/s is shaking try running a protocol with an unlatching command.
The command will raise an error as expected but the UI should show a user friendly message?
# Steps to reprodu…
-
### Overview
Hello there!
We are currently facing an issue (similar to **11484**) when executing a protocol from the command line with **opentrons_execute**.
We are calibrating the robot with t…
-
# Overview
A fix was included in 3.16 to allow access to 2nd row of 384 plates in API v2. However both 3.16.0 and 3.16.1 fail to allow accessing at the simulation process.
# Current behavior
StopIte…
-
As a researcher, I would like to be made aware of information I am missing to publish the figure.
-
# Overview
App remains unstable even after force quitting
After uploading protocol app goes white, force quit and it remains white
# Steps to reproduce
1. Open 6.0 beta
2. Connect to robot
…
-
### Overview
**### Accessing a CSV**
- Opentrons app/server: v6.3.1
- API: 2.11 or 2.14
Accessing a CSV appears to have some issues with the latest version. It appears there are 2 issues.
1) …
MSMDG updated
8 months ago
-
# Overview
On OT software&robot v5.0+, freshly calibrated (deck and all pipette parameters) before the run: Run a dispensing protocol where, in my case, a `p300_single_gen2` aspirates from a mo…