-
### Current Situation
I recently purchased a Liligo gateway (868 MHz) and flashed it with openmqttgateway. And I set it to 868 MHz to receive my wh51 moisture sensors, but I cannot detect any signa…
-
ESP8266 crashes hard when using pilight build, and receiver is getting input (eg, by pressing kaku/nexa RF remote)
Serial console output:
```
************* WELCOME TO OpenMQTTGateway ************…
-
There is another MQTT-Gateway project under active development.
https://github.com/1technophile/OpenMQTTGateway
I believe that both projects address the same idea.
They both developed in differ…
-
home/OpenMQTTGateway/433toMQTT/5535011 5535011
home/OpenMQTTGateway/433toMQTT/5535011/protocol 1
home/OpenMQTTGateway/433toMQTT/5535011/length 24
home/OpenMQTTGateway/433toMQTT/5535011/delay 185
…
-
This looks like something I wanted to build in conjunction with the OpenMQTTGateway.
I guess this sketch could be used to build a sensor node for OpenMQTTGateway right?
The RF module (RCSwitch?) can…
-
### Current Situation
Hey,
I have TTGO Lora 32 V2.1.6 flashed with fsk version of OpenMQTTGateway and Nooelec RTL-SDR both listening at 868.95Mhz but one parsing signal from water meter using Wire…
-
The TPMS-Jansite-Solar is supported by OMG since FSK can be enabled. With OMG 1.60 and 1.70 I face the following behaviour running OMG on a LilyGo. The sensor data is sent with the mqtt topic `OMG/OM…
-
Feature request: SwitchBot Remote W0301700
Dear OpenMQTTGateway guru,
I messed up and did not realize that the W0301700 is not listed on
https://decoder.theengs.io/devices/devices.html .
As …
-
Hi Andy,
Did you consider to mainstream your knowledge of HYDRAO BT protocol to try an implementation in :
- [OpenMQTTGateway](https://github.com/1technophile/OpenMQTTGateway) : Should just be a…
-
### Current Situation
With the original rtl_433 version and an SDR stick I can retrieve the BRESSER 7-in-1 weather station with the following command: rtl_433 -f 868.2M -s 1000k -X 'n=Bresser-7in1,m=…