-
When I compiled the firmware, the Esphome shows the log as below, it seems that some of the configuration of climate has been deprecated.
> Compiling .pioenvs/opentherm_gateway/src/esphome/componen…
-
..or otherwise be able to modulate the boiler gas valves for better fuel efficiency and longer boiler life?
Am I right in thinking the only way would be for the firmware to make a WiFi connection a…
-
2023-11-29 21:00:11.996 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0505;3302
2023-11-29 21:00:11.996 [bus notice] scan 08: ;Vaillant;BAI00;0505;3302
2023-11-29 21:00:12.007 [m…
-
Hi,
I successfully flashed v3.0.14-g963ffbb on an Amica NodeMCU (4Mb), and the wifi connection went smooth, it all seemed to work correctly. I've connected it to a Opentherm Gateway (in case anybody …
-
**Describe the problem you have/What new integration you would like**
It would be great if ESPHome would support opentherm and directly integrate into Home Assistant
**Please describe your u…
-
My (Emat) S0-meters work fine, but once I turn on Opentherm processing, the readings become very noisy (spikes up to 50000 W). I have a Plugwise Anna + Smile thermostat, which is right next to the Hei…
-
The ME102H is sending every 5 minutes a status message like below.
`{"idx":"thermostat_1122403","ip":"192.168.1.182","alive":true,"firmware":"1.24beta","temperature":21.00,"targetTemperature":19.00,"…
-
Hello, I use the shield with wemos d1 r1.
Shield uses pins D2, D3, D4 and D5, which is mapped to gpio 16, 5, 4, 14 according to ![wemos d1 r1 schema](https://aws1.discourse-cdn.com/arduino/origina…
-
Hi All,
I’m using the diyless master thermostat shield with a wmos D1. And esphome 2023.12.9. Also did try with opentherm library 1.1.5 instead of 1.1.4. But same result.
It’s connect to a 2.4g…
-
Hi team,
Thanks for your project.
I start with problems after update my enviroment.
I have HeishaMon communication PCB with openTherm from tindie and Aquarera J (KIT-ADC09JE5), internal unit WH-A…