-
I've noticed that this plugin has everything i would want for automated heating per room. The only thing however that is sadly missing is the possibility to use an opentherm based thermostat central h…
-
Hi there,
first of all (you heared it too many times but hey thats it) congrats and very big thank you for this far sophisticated software for Opentherm! I suppose you help a lot of people outside …
-
### The problem
Some time ago the Climate integration was changed to perform range checks on the temperature range to be set.
However, some of the integrations that Climate controls (the OpenTherm G…
-
### The problem
I have an opentherm gate made according to the design from the Schelte Bron website (http://otgw.tclcode.com). I have it connected via USB to my openwrt router. On the router, I use t…
-
Hi all,
I know this is not really an issue, but I don't have anywhere else to ask this question.
I have a Daikin D2CND with gateway DRGATEWAYAA, but I am using Opentherm Evohome. So, at the mome…
-
Hi, based on the same library it seems to be possible to manage also the Gateway Functionality.
The hw needed is available from [Diyless](https://diyless.com/blog/opentherm-gateway-sample) .
The a…
-
When I compiled the firmware, the Esphome shows the log as below, it seems that some of the configuration of climate has been deprecated.
> Compiling .pioenvs/opentherm_gateway/src/esphome/componen…
-
Hello,
I recently ordered Opentherm gateway so i would be able to monitor and change temperature between my current gas boiler Baxi nuovola duotec+24 and existing baxi thermostat.
i was able to as…
-
Hello,
Would be nice if your client can set Outside temperature over MQTT by choosing a temperature device from Domoticz.
And a field to send other commands.
Just like in the build-in OpenTherm…
-
I have a compilation problem:
```
INFO Reading configuration /config/esphome/opentherm-gateway.yaml...
INFO Generating C++ source...
INFO Compiling app...
Processing opentherm-gateway (board: e…