-
### Related area
Create an API for OpenThread within Arduino
### Hardware specification
ESP32-C6 and ESP32-H2 as Standalone Nodes.
Other SoC can be used as Open Thread Host mode attached to …
-
# Overview
With #3683, Tock added support for a minimal Thread network implementation. This implementation was completed in a Thread capsule and served to demonstrate the feasibility of Tock suppor…
-
When running `avahi-browse -r _meshcop._udp`, I get this result:
```
+ wpan0 IPv6 OpenThread BorderRouter #0F07 _meshcop._udp local
+ wlan0 IPv4 OpenThread BorderRouter #0F…
-
Hi,
The following line in the example border router breaks libraries that require network access:
`ESP_ERROR_CHECK(esp_netif_set_default_netif(openthread_netif));`
https://github.com/espressif/es…
-
Looking through the OpenThread page, I can find two different daemons for the OpenThread stack on linux:
- ot-daemon (https://openthread.io/platforms/co-processor/ot-daemon)
- otbr-agent (https://op…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Reproduction steps
When testing the wifi device in the same way, group control works.
This is not the case for thread Demokit devices.
Is another procedure required to group control thread …
-
Please consider also offering OpenThread NCP (Network Co-Processor) builds as an optional alternative to OpenThread RCP.
https://openthread.io/platforms/co-processor
PS: OpenThread NCP firmware …
Hedda updated
3 months ago
-
### Describe the issue you are experiencing
OpenThread Border Router not working anymore
### What type of installation are you running?
Home Assistant OS
### Which operating system are you running…
-
### Feedback
I have picked up an [Espressif ESP32 OpenThread Border Router](https://docs.espressif.com/projects/esp-thread-br/en/latest/dev-guide/build_and_run.html) for testing.
I have two use c…