-
Пробую бутлоадер Ваш, сделал по тексту,
сам бутлоадер прошился через Uno, далее подключаю плату через переходник, прошивка Александра под ntag, получил:
Error reading file (C:\Arduino\hardware\ard…
-
Any thoughts on this would be appreaciated @amcewen @ajlennon .
The 328 modules seem to not be entering program mode.. most annoyingly.
I scoped the serial output and they are actually jumping s…
-
Stretch goal will be to add the support of AVR DA/DB/DD part, similar to optiboot_dx.
Ref: optiboot_dx is too diffierent to be included in optiboot (optiboot_x is integrated into optiboot).
* http…
mcuee updated
7 months ago
-
I'm planning to use your Optiboot Flasher on the ATmega1284P, but there are a few things I don't understand:
* I'm not sure what you're referring to by 'buffer' in the documentation in the header o…
-
```
Several projects have appeared that use the ATmeg1284 chip (largest AVR
available in a DIP; the next step up from Sanguino.)
optiboot should be modified to support this chip as well; this should …
-
```
Several projects have appeared that use the ATmeg1284 chip (largest AVR
available in a DIP; the next step up from Sanguino.)
optiboot should be modified to support this chip as well; this should …
-
```
Several projects have appeared that use the ATmeg1284 chip (largest AVR
available in a DIP; the next step up from Sanguino.)
optiboot should be modified to support this chip as well; this should …
-
Hi,
This is very much what [I wanted](https://github.com/oh2aun/flashforth/issues/14) some time ago. As they say, "Great minds..." or "fools seldom differ"
I'm not sure if you have just implemen…
-
```
Several projects have appeared that use the ATmeg1284 chip (largest AVR
available in a DIP; the next step up from Sanguino.)
optiboot should be modified to support this chip as well; this should …
-
```
Several projects have appeared that use the ATmeg1284 chip (largest AVR
available in a DIP; the next step up from Sanguino.)
optiboot should be modified to support this chip as well; this should …