-
### The problem
when i call the service to set sensor.otgw_dhw_ovrd_gateway_otgw 1 and 0 seems to work fine, but when is send the command "A"the sensor gets unavaible until i reload the opentherm gat…
-
With some time in between (most of the time around a day or two) OTGW firmware seems to loose connection with PIC. As this happens the Home page of the OTGW webserver does only show header and buttonb…
-
Hi,
When setting a new temperature, the following error appears in the logbook and the temperature remains at the old setting.
Domoticz 2021.1 (Build 14046)
Python 3.7.3
ESP8266 Firmware Vers…
-
Hello,
I have your plugin running in domoticz Version: 2022.1 with OTMonitor version 6.4 and gateway firmware, version 4.3.
Otmonitor runs on a raspberry pi connected with the classic otmonitor …
-
Hello, i tried to compile it for my ESP8266
```
In file included from C:\Users\Michal\Downloads\opentherm-gateway-simple-main\otgw_simple\otgw_simple.ino:10:0:
C:\Users\Michal\Downloads\opentherm…
-
Hello Protaki,
I've got the following errors in the Domoticz log-file and repeats every few seconds.
> "2021-12-31 19:25:29.117 Error: OTGW MQTT Client: (OTGW MQTT Client) 'onMessage' failed 'Ke…
-
the OTGW gateway app reports "not in gateway mode" while the OTGW device in fact is in gateway mode...
When using OTmonitor and the command GW= is issued a valid response is generated. Might there be…
-
### The problem
I have an opentherm gate made according to the design from the Schelte Bron website (http://otgw.tclcode.com). I have it connected via USB to my openwrt router. On the router, I use t…
-
Hi @khenderick! @Alexwijn and I created a HACS custom component called [Smart Autotune Thermostat](https://github.com/Alexwijn/SAT). At the moment we are able to control an Opentherm Gas boiler throug…
-
I have OTmonitor publishing to /events/central_heating/otmonitor.
When I try to setup SAT with MQTT gateway and I use otmonitor for the "top topic" I get "No matching devices fount" when selecting…
hhoef updated
5 months ago