-
With some time in between (most of the time around a day or two) OTGW firmware seems to loose connection with PIC. As this happens the Home page of the OTGW webserver does only show header and buttonb…
-
Hi,
When setting a new temperature, the following error appears in the logbook and the temperature remains at the old setting.
Domoticz 2021.1 (Build 14046)
Python 3.7.3
ESP8266 Firmware Vers…
-
Hello,
I have your plugin running in domoticz Version: 2022.1 with OTMonitor version 6.4 and gateway firmware, version 4.3.
Otmonitor runs on a raspberry pi connected with the classic otmonitor …
-
### Operating System
Fedora38
### Esptool Version
esptool-4.5.1-2.fc38.noarch
### Python Version
https://packages.icinga.com/epel/8/release
### Chip Description
ESP8266
### Device Description
…
-
Hi,
denk dat he teen mooie plugin is, kan hem alleen nog niet gebruiken want ik heb een login bij mosquitto
Can you add to your plugin an mosquitto authentification
groetjes
anton
-
I have OTmonitor publishing to /events/central_heating/otmonitor.
When I try to setup SAT with MQTT gateway and I use otmonitor for the "top topic" I get "No matching devices fount" when selecting…
hhoef updated
5 months ago
-
Looks like the description of the **hotwater** settopic value is incorrect here:
https://github.com/rvdbreemen/OTGW-firmware/wiki/Using-the-MQTT-set-commands
Instead of :
`temp = [number e.g. 20.…
-
Wemos D1 reboots about every 10 seconds
Reboot log
2023-02-02 19:48:17 - reboot cause: Exception (2) - Access to invalid address (28)
ESP register contents: epc1=0x40241688, epc2=0x00000000, epc3…
-
I have flashed this firmware to a nodeMCU and did the initial configuration to connect it to my wifi network. OTGW data is now accessible over port 25238 (using openHab BTW). Only issue I have is that…
-
Hi @khenderick! @Alexwijn and I created a HACS custom component called [Smart Autotune Thermostat](https://github.com/Alexwijn/SAT). At the moment we are able to control an Opentherm Gas boiler throug…