-
### The Problem
OV2640: Brightness, contrast and saturation parameter are not functional anymore.
This workaround to enable functionality is somewhere lost between 15.7 and 16.0:
https://github…
-
Hello, i'm trying to use the freenove esp32 wrover board, with Zephyr Os.
Everything was perfect until i try to use the camera, i add it to the devicetree with :
```
&pinctrl {
i2c_cam: i2c_…
-
Since I want to use ov2640 camera. I used below command to build firmware. (followed most step as https://github.com/lemariva/micropython-camera-driver)
The firmware can be generated , but its size i…
-
This issue revisits https://github.com/espressif/esp32-camera/issues/101 which was closed due to inactivity.
However, @me-no-dev commented that he 'will implement this very soon' - which was 4 years …
-
Is there any way to use OV2640 interface? kinomi 2 was advertised to be able to use camera and humidity sensor
currently software doesn't take advantage of that
-
When connecting a OV5640 lens module i get the following message:
--------------------------------------------------------
Camera init succeeded
WARNING: Camera module is unknown and not properly s…
-
If you are using the Xiao ESP32S3 Sense with OV2640 camera you may be experiencing short battery life when in deep sleep mode. It seems the OV2640 does not go to sleep with the CPU and continues to c…
-
hi there how can i get this working with the ov2640 camera
-
I just used the following code: [https://github.com/0015/ThatProject/blob/master/Cellular/T-SIMCAM/01_T-SIMCAM_ImageUploader/01_T-SIMCAM_ImageUploader.ino](url) with the T-SIMCAM and the SIM7600G-H m…
-
Will this work with OV2640 by chance?