-
i get:
✓ Packet Loss: N/A
does that mean no packet loss, or "none", because, i dont know about you but, packet loss is definitely "applicable" in my life. LOL
or, does that output mean that t…
-
Continuing from https://github.com/greatscottgadgets/luna/issues/67
Capture other available information from the PHY such as speed changes, bus resets, RX errors, etc.
An initial version could b…
-
@ynadji and @JustinAzoff hit a scenario where Dicts report iterator invalidations via `internal Dictionary::Remove() possibly caused iterator invalidation`, triggered as follows:
```
(gdb) bt
[31/4…
-
```
Run a packet analyzer on the TUN/TAP interface. Packets appearing on the
TUN/TAP for NAT3D disappear. Analzyers attempted are Windump (tcpdump for
windows) and wireshark.
This might be due to td…
-
If you have the Packet Analyzer open and you add a packet to the op filter, the message box asking if you want to delete the current packets will be behind the Packet Analyzer and the user will be una…
-
When resetting an analyzer, is it possible to return the current result for the old analyser, before the reset (and not for the new one, after the reset)?
-
Hi. There are many problems with VVC in YUView.
My OS is windows 11 and i use MinGW compiler.
I am using YUView-2.14 and vvdec-2.3.0.
vvdec was compiled as a shared lib with `-DBUILD_SHARED_LIBS=1`…
-
Hello,
i'm testing transmitting EPG logos with OpenDigitalRadio. I created a multiplex with 2 channels and created the SPI with 4 logos each with ODR-Bridge-EPG.
Playback of audio channels works…
-
Just released version 1.19
Most obvious change in this release is the LookAndFeel. Until now DVB Inspector used the "SystemLookAndFeel", where java tries to look as much as possible like a native a…
-
CAN Bus Analyzer is connected to the Processor CAN Bus.
**CAN1 and CAN2 have issue transmitting packets.**
CAN3 interface transmits packets immediately. CAN 3 transmit works.
To reproduce this…