-
### Discussed in https://github.com/dannagle/PacketSender/discussions/371
It would be nice if Packet Sender supported other transport protocols besides UDP and TCP.
-
Hello author, the test section in the article mentioned "run the gptp_packet_sender.py script in $TSNZEEK_PATH/scapy", but I did not find the gptp_packet_sender.py file in the source code. Is it missi…
-
Hello,
I was trying to send ipv6 packet using pnet on transport channel at layer3. It was surprisingly for me, that send_to on layer 3 is not implemented for ipv6. (I am trying to do this on my kubu…
-
-
Allow specifying format/rate/channels of:
- [x] input frames (sender API)
- [ ] input device (sender CLI)
- [x] output frames (receiver API)
- [ ] output device (receiver CLI)
- [x] network pac…
-
I have a packet header header defined as follows.
How do I ensure that
1. `size` is less than 1023,
2. `header_crc` matches the checksum of the first 3 bytes of the packet, and
3. `packet_c…
-
### Bug description
**Describe the bug**
During testing, I found that if the client first sends a FIN command to the server and then immediately sends an RST command, the server will immediately clo…
-
To calculate the delay between sending a packet and receiving it, you must use the RTCP Sender Report. Is this functionality expected to be implemented?
-
I wrote a test component `nic_perf` in order to benchmark the throughput of the Nic and Uplink sessions. During my tests, I came across a weird performance degradation in the Nic router. The setup is …
-
Hi!
I'm basically trying to achieve the following, suggested [here](https://github.com/tsduck/tsduck/issues/593#issuecomment-640199332):
> can also use the class UDPReceiver to read UDP input and …