-
Would be great to start with a basic set of working BLE & C1111 drivers. A basic BSP or "blinking LED equivalent" source code would be a very helpful.
-
Can I add firmware that supports pandwaRF Android App to Ys1? Make YS1 use Android App through OTG.
-
Hi,
I have used the pandwaRF for year and a half and it has worked very well up till today. The battery was low and I started charging the dongle. But, there was no orange led blinking. Also, the p…
-
I thought changing PKTCTRL0 to 0x00 would remove any length or address bytes, but a Length byte was still being added to the packets.
I had to change the first line of sendData function to fix this
…
-
1) Please add possibility to use custom template without Loading it (pressing Load).
Just as integrated templates (home alarm, wireless chime, etc.)
-
https://duo.com/decipher/flipping-bits-and-opening-doors-reverse-engineering-the-linear-wireless-security-dx-protocol
-
### Describe the bug.
I'm trying to send a message with Sub-Ghz app with a 25µs bit.
I tried both Raw and BinRaw format, with Raw a bit is lost every 25 to 40 bits, with BinRaw a bit is lost every 2…
-
Hi Joel,
I was reading your code and I think you can add support to .sub files easily copying the function `sendByte()` (at least for the raw format):
https://github.com/joelsernamoreno/EvilCrowRF-V…
-
./rfcat -r
'RfCat, the greatest thing since Frequency Hopping! Modified version to run with PandwaRF'
Research Mode: enjoy the raw power of rflib
currently your environment has an object called…
-
Hi,
I i've a Pandwarf Rogue Pro and the product id is 0x60fe.
To work with rfcat I had to modify this line in cc1111client.py :
if (dev.idVendor == 0x0451 and dev.idProduct == 0x4715) or (dev.i…