-
Get PCBs made.
-
bqUAB updated
6 years ago
-
Hi,
I appreciate all the efforts that you have put into building the system. But unfortunately, I do not know electronic chips or systems and can not develop the PCB from the available information. …
-
-
There appears to be a mismatch between the silkscreen designators and the actual footprints for R8 and R33 on the OCXO Daughter Card V4 PCB.
According to the BOM, R33 is an 0201 component, and R8…
skear updated
3 weeks ago
-
## v5.5 Testing
- [x] Microcontroller powers on
- [x] i2c devices detected (with AP KB PCB connected)
- UFC GPIO expander detected at 0x34
- AP KB GPIO expander detected at 0x20
- [x] Keypad …
-
Services like PCBway or JLCpcb expect Gerber file to start the PCB production, Can you provide them besides KiCad? Steps are here:
https://www.pcbway.es/helpcenter/technical_support/Generate_Gerber_…
-
### Prerequisites
- [X] I have read the documentation and the proposed feature is not implemented.
### Description
For depanelization I prefer the manual DP-25-N tool pictured below. It is availabl…
-
Open-source hardware projects are wonderful.
As an electronics and embedded software engineer and retrocomputing restorer, they are an integral part of my work toolkit. However, there’s a challenge: …
lazaj updated
2 weeks ago
-
- PCB
- https://www.linkedin.com/pulse/pcb-design-output-data-manufacturer-requires-amit-bahl/?articleId=6679094026790162432
- https://www.7pcb.com/Upload_file/DFM_Guidelines.pdf
from OPEN-NE…
moedn updated
4 months ago