-
Proxmox is running on Raspberry Pi 5, using an additional PCIe Sata Controller connected to HDDs (working fine).
Goal is to pass through this PCI device to an Open Media Vault VM (for SMART values an…
-
Jira ticket
TAPC-1104
-
Hi.. just to give some report about this mod..
I followed guide from this website ( I was unable to open all files but I figured out what is needed to be soldered on motherboard)
I did modifica…
-
**Describe the bug**
I'm running a Pi 5 / BCM2712 with an external Broadcom [PEX 8619](https://www.broadcom.com/products/pcie-switches-retimers/pcie-switches/pex8619) PCIe switch. It is on the late…
-
### Description
Appliance seems to detect the hardware but firmware crashes on load.
```mhi mhi0: Direct firmware load for ath11k/WCN6855/hw2.1/amss.bin failed with error -2```
### Host operating…
-
virtual machines have very slow graphics on both `virtio` and `qxl`, so slow that often I can see how the desktop effects on VMs are rendered (I.E. the direction of fading effect). I cannot reproduce …
-
_From @gardar on Feb 20, 2020 16:48_
##### SUMMARY
It would be good if it would be possible to add pci devices for vmware guests, both shared pci devices and passthrough.
##### ISSUE TYPE…
-
Hi! When trying to boot from the usb key the process stops after some seconds, and the last lines are `sdhci-pci` related:
![PXL_20241016_111627756](https://github.com/user-attachments/assets/f2a90d8…
-
**Describe the bug**
Can not disabled pci gpu after enabled pci gpu
**To Reproduce**
Steps to reproduce the behavior:
1. enable pci device addon.
2. enable pci gpu
3. disable pci gpu
**Expe…
-
Hi, LA periodically grows in hive on version 0.2.5 and 0.2.5 hotfix. The rig reboots on watch dog. On version 0.2.4 it works stably for weeks.
version 0.6-227@241017
drivers N 550.78
linux kernel…