-
The feeder is working great with a service running on a RPi0W!
Although the logs don't seem so good.
I'm having a repeating error every couple of milliseconds(!):
```
petnet-feeder-service …
-
Hi guys,
First, This project is amazing! I've been going over it testing and running on a raspberry for almost two weeks now and I'm super excited that I got my feeder to work :)
Anyway, I'm tryin…
-
Hello! Thank you for creating this project as it will be extremely helpful once I get it up and running.
I have read over the Wiki extensively and followed the all the steps except for creating my ow…
-
Had to reset my database and found that the latest image seems to be having troubles finding new feeders.
Was able to find an old image on Docker: https://hub.docker.com/r/tedder42/petnet-feeder-se…
-
This scrolled out of my tmux buffer, but at the end I see this repeating:
```
The above exception was the direct cause of the following exception: …
-
Placeholder for a v1 discussion, spinning out of #12.
-
I'll start by giving you a big THANK YOU for breathing new life into my feeder!
I successfully got everything set up about 3 months ago, and at the time, had only configured 1 feeding per day. It was…
-
Does the serial port output anything useful (i.e. can you determine cat going in and out) in normal operations?
I am thinking a possible solution to avoid MITM and hang an ESP32 (or similar) runnin…
-
The Compose file is invalid because:
Service nginx has neither an image nor a build context specified. At least one must be provided.
-
It would be good to have a binary of the firmware that the device uses. The board has two unpopulated JTAG headers along with a [Silex Technology SX-ULPGN](https://www.silextechnology.com/hubfs/Resour…