-
- [ ] The `holochain_client` shouldn't need to depend on Kitsune and tx5, these come in through types libs
-
we started hitting errors under very small load caused by core_component.php being stored on gluster share
```
[2018-05-23 08:30:03.116483] W [MSGID: 109065] [dht-rename.c:1387:dht_rename_lock_cbk…
-
Hi
I've been reading up on https://github.com/rakshasa/rtorrent/wiki/Performance-Tuning and sample config there is used with 74/20 Mbps connection, 4 GB RAM and 1 local disk device.
Now I have a…
-
Using 0.9.8 release and udns branch releases, sometimes when some tracker(s) cannot be reached all tracker updates gets halted.
No peers found at all, public or private does not matter.
Sometimes …
-
Most of the proposals we have made as part of the development bounty program we started requires multithreading.
This is for making a good easy to use, yet powerful library within rTorrent/libTorre…
-
I am using a clean Raspberry Pi OS install (version: 2021-03-04-raspbian-buster) on a Raspberry Zero WH. You can [download the image](https://github.com/Honey-Pi/HoneyPi-Build-Raspbian/releases/tag/Ho…
-
Not sure what a good answer to this is, or if it's even something that should be required of Blinka. But starting here.
This issue is a good example of what can happen:
https://github.com/adafruit…
-
See https://forums.adafruit.com/viewtopic.php?p=957161 for discussion thread.
The **Resolution** values for both Temperature and Humidity are incorrectly defined in DHT-U.cpp for DHT11 sensors.
…
-
Hello
Problem with dht library not working properly in subzero temperatures with dht22 module.
reports (-3264.4°C)
it is written here about a domestic problem https://forums.raspberrypi.com/viewto…
-
Would it be possible to use DHT 12 sensor with this module? (The board im using https://wiki.52pi.com/index.php?title=EP-0106)