-
Any reads from the piface chip are all returning 0. I don’t know if it’s a kernel issue or what.
Has this been tested on Buster?
OS Version: | Raspbian GNU/Linux 10 (buster)
Kernel Version:…
-
Evening folks,
I recently got my hands on a PiFace Digital 2, however, I'm struggling to make my Raspberry detect it.
Following the instructions found on the [official page](http://www.piface.or…
-
Buzzer piepst nicht wenn dieser über die PiFace angesteuert wird. Hier eine Variante von /craftbeerpi/brewapp/base/buzzer.py die mit PiFace läuft als Beispiel:
```
from brewapp import app
from views …
-
The installation instructions located here (http://www.piface.org.uk/guides/Install_PiFace_Software/Installing_PiFace_Digital_modules/ ) threw an error. I think I can figure it out from here but thoug…
-
Hey NobodyMO,
i tryed to install your node in IOBROKER Ned-Red but it will not work.
I opend allready a issue https://github.com/tualo/node-pifacedigital/issues/9
So, your system is build on …
-
I don't have the Piface Digital 2 hardware to test this out. Anyone able to confirm?
-
I have three PiFaces connected to a PiRack, which work well with python3 commands of the type p.digital_write(0,1,2) to switch on LED 0 on Board 2. I have downloaded the newest version of the Emulator…
-
The readme for node-red-node-piface has the following pre-reqs:
```
Device Tree must be turned off. To do this run
sudo raspi-config
then select the Advanced Options, then Device Tree, and fin…
-
I'm experiencing an interesting problem with this library -- in testing I'm receiving intermittent invalid readings of input states showing the first input button continuously depressed when it is not…
-
After installation of 2.2 piface dont Switch. Not in manual and not in automatic.
Wolf