-
While Heltec did not label any pins as SDA/SCL, it is still possible to use few unassigned GPIOs for I2C communication. I've just tested BME280 with GPIOs 4 and 5. Is any "official" choice of such pin…
-
Hello there!
First of all, Thanks for contributing and helping our industry with this project!
When using ImGui 1.91.1 version, pins seems to be a little bit offset. Using your provided example,…
-
Hi, I would like to make this work on ESP32. I was able to get it compiled but I am not sure of GPIO vs RS485 and pentair controller.
ESP32 GPIO 45, 46 as RX/TX
45 to 485 TXD
46 to 485 RXD
R…
-
I am looking to port a private mesh communication system over to t-deck (https://chatters.io) and I really need to get an IIC connection (spi would be great too).
Looking at the back of the t-deck,…
-
Was trying out the following examples and they seem to crash when connecting pins to other objects with a Pin UID not found error.
```
ImNodeFlow.inl:189: const T& ImFlow::BaseNode::getInVal(const…
avlec updated
2 weeks ago
-
On the [AMDS mainboard page](https://docs.amdc.dev/accessories/amds/mainboard/index.html), the pins for the larger header are labelled as such:
![image](https://github.com/user-attachments/assets/c…
-
-
Hi,
I want to use the lib on a ESP32. But the default I2C Pins are already in use.
Is there a possibility to set different pins for SDA / SCL in in using this library?
Thanks for help!
-
### Description
While studying synthesis I noticed, for commutative operations (AND/OR reduction, cumulative sum, ...) it would be possible to reorder the input signals (any permutation, or any num…
-
**Is your feature request related to a problem? Please describe.**
It can sometimes be hard to see which pin is active at a glance while moving quickly
![image](https://github.com/user-attachments…