-
This feature request is to add a new "mode" to BlueSCSI that allows it to connect legacy SCSI devices to a …
-
# Info
- Which version of Pi are you using: Raspberry Pi 4 Model B (1GB)
- Which github revision of software: v24.04.01
- Which board version: akuker 2.6d
- Which computer is the PiSCSI connecte…
delan updated
3 months ago
-
It shall be evaluated whether an LRU cache results in a performance gain. If it does, it shall be implemented with a configurable size. In case it turns out that such a cache outperforms the PiSCSI le…
-
# Info
- Which version of Pi are you using: Raspberry Pi 2 Model B Rev 1.1
- Which github revision of software: 24.04.01
- Which board version: 2.7
- Which computer is the PiSCSI connected to: A…
-
As per the discussion in https://github.com/PiSCSI/piscsi/issues/1321 , there are signs that the current solution for spinning up piscsi_bridge isn't working anymore on Debian 12 Bookworm.
This tic…
-
# Info
- Which version of Pi are you using: RPI 3 B v1.2
- Which GitHub revision of software: November 2023 release
- Which board version: PiScsi Zero v1.0 FULLSPEC
- Which computer is the PiSCS…
-
initiated from a [discussion about proper installtion paths](https://github.com/akuker/RASCSI/issues/445),
i tried to get an understanding of the possibilities and challenges regarding
the distribut…
-
# Info
- Which version of Pi are you using: Raspberry Pi 4 Model B (1GB)
- Which github revision of software: v24.04.01
- Which board version: akuker 2.6d
- Which computer is the PiSCSI connecte…
delan updated
3 months ago
-
# Info
- Which version of Pi are you using: Raspberry Pi Zero W Rev 1.1 Linux 5.15.84+ armv6l
- Which github revision of software: 23.2.1
- Which board version: 2.4a
- Which computer is the PiSC…
-
Something changed with the Raspberry Pi Imager between v1.7.4 & v1.8.1 that seems to affect network startup & the 1st run of the `piscsi-web` service (which runs `piscsi/python/web/start.sh`). The in…