-
Hello,
I am encountering issues with running applications at startup on PlutoSDR firmware version v0.39.
I created a script named S101test.sh and placed it in /etc/init.d. According to the rcS s…
-
I want to program the PL part of ZYNQ, but I need a backup of the bitstream. Where can I get it from? If you think about it, LibreSDR is a clone of PlutoSDR, but does that mean that a project for Viva…
-
Do you plan to add timestamping support to plutoSDR FW?
-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…
-
Hello,
Could you please provide more details on how to write firmware to the internal flash drive? I've successfully run your firmware from the SD Card and now want to transfer it to the QSPI flash…
-
If You loaded FW from official site istade of pluto plus FW, ...just change jumpers :
to this:
**When using the official ADI-PlutoSDR firmware, please connect to URST-MI052.**
When using Pluto+ f…
-
hi. how can i build the uboot and linux kernel & rootfs? are they open sourced? i didn't find any place that have structure similar to https://github.com/analogdevicesinc/plutosdr-fw . so i cant use t…
-
Hello
I am running into issues building v0.34 firmware for the E200 AntSDR. I am using Ubuntu version 22.04 and Vivado 2019.1. Any help is greatly appreciated.
The error I am experiencing is as …
-
Hello, this post aims to be more like a "FAQ Space" for most our problems to find solutions.
If you have anything, you can add as a comment, please put #FAQ at the beginning and some texts (tags) tha…
-
Hi, I realize that you aren't responsible for the LibreSDR but I kinda need help
I tried to copy your pre-built firmware on a freshly formated SD card fileformat FAT32
my LibreSDR does not seem …