-
There are basically three options when you want to build a duplex repeater on PMR446 band and not have your input overloaded by the output:
1. Make the repeater input in LPD band (50 mW absolute maxi…
-
If you have suggestions for something to add to a bandplan you can mention it here!
Since there are so many things across the spectrum, I am bound to overlook something or not be familiar enough w…
-
**Feature description**
FM transceivers often use the audio noise level rather than the RSSI level as a squelch trigger. This is able to let through weak signals with fluctuating signal levels (e.g. …
-
**Feature description**
Currently OpenWebRX frequency setting has 4 decimals, meaning it has 100 Hz resolution. This makes it non-optimal for e.g. PMR446 monitoring, as its channels have separation b…
-
In accordance with EU current regulations, the use of PMR446 devices is limited to a maximum power output of 0.5 W (500 mW), and the use of external antennas or modification of the equipment to increa…
-
I see the BOM for the [FlockOne](http://github.com/RavenLRS/Flock/tree/master/hardware/FlockOne) uses a 433MHz chip, are there plans for using other bands, such as 915MHz? I think 915MHz is more popul…
-
Hi,
It would be nice to have the possibility to customize the TX-lock range in chirp or maybe use one of the channel-mode scan-list as a TX-whitelist.
If this feature isn't possible, it would be…
-
Would it be possible to add more bandwidth values and show the exact number?
For example, others fw allow to choose between 5 / 6.25 / 8.33 / 12.5 / 25 KHz
Where 25 and 12.5 are the usual bandwidt…
-
If possible via software, please consider reducing the "L" power level to something more reasonable. Currently, it is over 2.7 W for L power on 2m and over 2.4 W on 70cm. See [this video](https://www.…
-
Hi,
Not an issue, just a question (apologies if questions should be posed elsewhere).
When I try to get Linphone Android's Assistant->RemoteProvisioning feature to process a locally stored (on-d…